Buttons 5 and 13 acting weird ?

Home › Forums › Support › Buttons 5 and 13 acting weird ?

This topic contains 7 replies, has 4 voices, and was last updated by Avatar of Fading Canvas Fading Canvas 9 years, 11 months ago.

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • December 22, 2014 at 5:33 pm #1761
    Avatar of Fading Canvas
    Fading Canvas
    Participant

    Hi,

    I’m very interested in your firmware. I bought a BCR-2000, all buttons and encoders seem to work ok when using the original firmware. However, I can’t select a preset below number 7 using the preset buttons.

    I tried the Zaquencer demo, but buttons 5 and 13 seem to act weird:
    https://dl.dropboxusercontent.com/u/15207816/Screenshots/2014-12-22%2018.22.48.mov

    Is this normal behaviour ? Or is my device a little faulty ? Please assist.

    December 22, 2014 at 6:00 pm #1763
    Avatar of alien_brain
    alien_brain
    Participant

    i bought a total of 4 new BCR-2000s and returned 2 of them for faulty buttons

    • This reply was modified 9 years, 11 months ago by Avatar of alien_brain alien_brain.
    December 22, 2014 at 6:24 pm #1765
    Avatar of fabi
    fabi
    Participant

    I have two old BCRs and they’ve been working fine, except for the button that is the zaquencer’s play/stop button not working unless i push it from an angle, kind of.

    December 22, 2014 at 6:33 pm #1766
    Avatar of alien_brain
    alien_brain
    Participant

    deoxit worked on similar tact switches in my asr-x pro… might try that. otherwise you can probably replace them if need be. i imagine theyre surface mount, and as such wont be easy to replace. good luck.

    December 22, 2014 at 6:35 pm #1767
    Avatar of Christian
    Christian
    Keymaster

    Hi Fading Canvas,
    thanks for your question and for sharing the video.
    What you are experiencing is not normal behaviour.
    There is definitely something funky going on with your individual BCR.

    Actually it looks exactly like the multiplexer error that is described on this page:
    http://ricardo-dias.com/2013/07/19/repairing-a-behringer-bcf2000/

    Out of curiosity, did you buy new or used? What does it say on the Date Code sticker on the back?

    December 22, 2014 at 7:59 pm #1770
    Avatar of Fading Canvas
    Fading Canvas
    Participant

    Thanks you all for replying !

    Wow, 2 faulty out of 4. And I’ve read a lot of other stuff, problem with the multiplexer. I’m not planning it on repairing it myself. I got this thing brand new, the date code says 1203.

    I also asked for support at Behringer. I made a video of the BCR acting funky with their own firmware, the buttons for selecting the preset page are also acting weird. Pushbuttons 5 and 13 work ok this way. I will return the device I think.

    Problem is, I think I got the last one in this country. Some clever guy made some good firmware for these things, the’re out of stock everywhere now !

    December 22, 2014 at 8:23 pm #1771
    Avatar of alien_brain
    alien_brain
    Participant

    dont mention you changed up the firmware or you will ruin your chances for a return. zaquencer voids your behringer warranty.

    yep i got the last one from guitar center, and 2 of the last from sweetwater sound. i would attempt to get new ones because of the fragile build.

    December 22, 2014 at 8:37 pm #1774
    Avatar of Fading Canvas
    Fading Canvas
    Participant

    changed firmware ? what firmware ? ;-)

  • Author
    Posts
Viewing 8 posts - 1 through 8 (of 8 total)

You must be logged in to reply to this topic.