This topic contains 1 reply, has 2 voices, and was last updated by 
Christian 9 years, 5 months ago.
-
Posts
-
Hello
I received my sticker today. I did cut it in 9 parts to get it on the BCR2000.
Is this me, is this a bad batch or …?Pics here, the small black strips show the sticker is too big, too wide so you get air under the sticker, you see the letters underneat peep out next to the sticker, of key cut outs won’t allign at all. I tride to do it best possibel ,ahd to remove the half round sides to keep it simple.
Pics here:
Hi Steve,
sorry to hear that you´re having trouble with the sticker.
I´m not aware of having had a bad batch. The stickers are individually packed by us, so I´m sure large deviations, if they existed, would have caught our eye.It is a bit tricky to cover all the pre-printed writing on the BCR, but in our tests with the sticker we have found enough satisfactory positions to put it on.
I´ve just taken this picture, which is from the most recent batch of overlays (the one that went out to everyone so far):
https://flic.kr/p/pYUG5GPlease send an email to support@zaqaudio.com with your order number and we´ll see if we can do anything more for you.
-
This reply was modified 9 years, 5 months ago by Christian.
-
This reply was modified 9 years, 5 months ago by
You must be logged in to reply to this topic.