Mod Wheel causes Reset Home › Forums › Bug Reports › Mod Wheel causes Reset This topic contains 4 replies, has 2 voices, and was last updated by Misja 6 years, 3 months ago. Viewing 5 posts - 1 through 5 (of 5 total) Author Posts June 15, 2016 at 8:27 am #4851 MisjaParticipant When using the Mod Wheel on my keyboard all the parameters on the Zaquencer are reset. How can I avoid this? I am still on V1.00 June 20, 2016 at 5:33 am #4868 ChristianKeymaster First, please upgrade to 1.042 and see if the problem persists. Lots of bugfixes happend inbetween these versions. September 29, 2016 at 2:03 pm #5125 MisjaParticipant I just installed the latest version, 1.5 The problem stil occurs: When I move the modulation wheel on my keyboard which is connected to the midi in of the BCR, all the parameters reset. October 4, 2016 at 8:16 am #5142 ChristianKeymaster I have an idea! Can you check the global menu, encoder 9 (Trigger Enbl) and verify that it´s set to “off”. Then try the modwheel again. Reason being: by sending CC1 you might trigger a pattern load command and might accidentally load an empty pattern, thus resetting all the parameters. October 7, 2016 at 7:12 am #5158 MisjaParticipant That solved it! Thanks!! Author Posts Viewing 5 posts - 1 through 5 (of 5 total) You must be logged in to reply to this topic.