Note Display

Home › Forums › Support › Note Display

This topic contains 4 replies, has 2 voices, and was last updated by Avatar of Dave Dave 7 years, 8 months ago.

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • March 4, 2017 at 12:08 pm #5598
    Avatar of Dave
    Dave
    Participant

    Hi all
    MyZAQuencer displays flats and not sharps.
    How can I change this ?.

    Many Thanks

    March 4, 2017 at 12:29 pm #5599
    Avatar of Christian
    Christian
    Keymaster

    Hi Dave,
    this is the only mode of operation at the moment Im afraid.
    There was no satisfactory symbol in the 7segment LCD for sharp notes so I chose to have it display flats only.

    Best,
    Christian

    March 4, 2017 at 12:43 pm #5600
    Avatar of Dave
    Dave
    Participant

    Hi Christian
    Thanks for the quick reply but I thought the manual stated sharps were displayed as an “S” as
    in CS4 being C sharp Octave 4 ?.

    Many Thanks

    Dave

    March 4, 2017 at 1:24 pm #5601
    Avatar of Christian
    Christian
    Keymaster

    Wow, you’re right about the manual. Cant believe that this hasn’t come up before.
    This is a mistake in the manual, as I guess from an older Zaquencer version.
    Development started with the mode described in the manual (S for sharp), but I wasn’t happy about this, because the “S” is the same digit as a “5″. It was very confusing with the octave number, so I changed it to “b”. Have to change the manual for the next version :)

    March 4, 2017 at 1:40 pm #5602
    Avatar of Dave
    Dave
    Participant

    Thanks again Christian and glad to be of assistance :).
    The ZAQuencer is fantastic by the way.

    Dave

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)

You must be logged in to reply to this topic.