Preferred Standalone Mode S1-S4

Home › Forums › Support › Preferred Standalone Mode S1-S4

Tagged: 

This topic contains 2 replies, has 2 voices, and was last updated by Avatar of Theodor Theodor 10 years, 2 months ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • October 26, 2014 at 11:09 am #995
    Avatar of Theodor
    Theodor
    Participant

    Hello! I would like to ask what is the preferred standalone mode of the BCR when trying to upload the Zaquencer firmware and when working with it. I have currently set mine to S-3. Will that do?

    Thanks in advance!

    October 26, 2014 at 12:08 pm #996
    Avatar of Christian
    Christian
    Keymaster

    Hi Theodor and thanks for your question!
    The standalone mode should not matter for the upload, as you enter the BCR´s bootloader mode for uploading the firmware, and this is independent of the other modes.

    Also it doesn´t affect working with the Zaquencer. The mode selection (standalone/universal) is part of the BCR firmware and that gets completely replaced by the Zaquencer.
    The Zaquencer always only functions with the standard Midi jacks on the back and not over USB.

    Cheers!

    October 26, 2014 at 1:24 pm #998
    Avatar of Theodor
    Theodor
    Participant

    OK Thanks! In the meantime I figured as much! Already got my Zaquencer up and running! ;)

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.