Ok, looks like we´re almost there.
Regarding 3 I meant that you have to match the channel and a/b out of the track you´re using as drumtrack to the Jomox.
As an example, let´s say you choose track 2 on the Zaq for your drumtrack.
These steps are needed to match it to the Jomox:
- Go into Global Menu
- turn encoder 14 to set the trackmode for track 2 to “drum”
- turn encoder 19 to set the physical output of Zaq´s track 2 to the one that the Jomox is connected to (A/B). When in doubt, try “Ab” so it sends it´s notes to both outputs
- turn encoder 20 to set the midi channel for track 2 to the one that the Jomox receives on (1-16). Midi drums often receive on 10, but if in doubt you can try all 16 after another or refer to the Jomox manual
- exit Global menu by pressing “Global”
When the Zaquencer sequence is playing, please check if the output LEDs A/B are blinking. This tells you if notes are being generated and sent over midi.
Please let me know how you go or if you have more specific questions.