[LowcaseParticipant]

I checked the MIDI messages and it is even stranger then before. The messages are exactly the same so Zaquencer seems to be working correctly.

 TIMESTAMP IN PORT STATUS DATA1 DATA2 CHAN NOTE EVENT               
 0001494D   1   2     90    3C    6E    1  C  4 Note On               
 00014ADC   1   2     90    3C    00    1  C  4 Note Off              
 00015555   1   2     B0    40    7F    1  ---  CC: Pedal (Sustain)   
 00015A5D   1   2     90    3C    75    1  C  4 Note On               
 00015B30   1   2     90    3C    00    1  C  4 Note Off              
 00015EB9   1   2     B0    40    00    1  ---  CC: Pedal (Sustain)   

First pedal message is when it was pressed and second when it was released. But even that messages are untouched the Blofeld is behaving as I described in previous post. When I press the pedal the MIDI let will blink so the message is received but I don’t understand why it is ignored.

Could it be some issue with the MIDI cable? I have only two of them so I can’t try to use different one right now. But currently the behavior is still the same when I switch the cables.

• This reply was modified 9 years ago by  Lowcase.

[Author]

Posts