Forum Replies Created
-
Posts
-
Hello zaq,
everything works fine now, tried this procedure several times, i did use some other software for flashing, but did get similar results, so decided to stay with midi-ox after first evening.
Still not sure why i did get complete failure on other midi interface.
As a developer i would suggest if users are seeing “- <number>” BCR is still waiting for something(possibly software issue?.
Now testing demo, basically trying to decide if i want to flash it on this BCR unit or get another(as licence is per unit), this one does work ok, but definitely it doesnt feel the same due to old age and environment it was stored in.
Demo works great so far, will let you know if spot anything, will try it for few more days.This took some time but may be very helpful for other users, i think i’ve solved this situation and it is very, well, unusual.
Basically I have 2 audio interfaces with midi, tascam us-122(very old! and cheap) and sonic core xite1.
Complete fail when using xite1(most expensive interface I have), no chance, did always get “F” on left side of screen, spent whole evening tweaking things and monitoring.
Booted up tascam us-122(it took a while to install it, no drivers since 2007, messages like “this windows version is not supported” etc…).
This one seemed to work ok(at least no “F” on left side), except “noOS” for demo or purchased version of zaquencer. Was able to reflash original behringer firmware with no problems(with different midi-ox settings). So started experimenting with midi-ox settings, a lot…(did previously too).
Did take hours for this, experimenting with buffers, delay after F7, delay between buffers.
I accidentally found that after flashing with zaquencer i need to change buffer number and “delay after f7″ this seemed to “flush” something to BCR.
Basically i have settings like this: 150 for “delay after f7″, size “305″ num “4″ for buffers, “0″ for buffer delay. When i flash BCR i get “- 13″ on display in BCR, changing buffers “num” to 5(dont disconnect BCR or do anything with it), seems to do something(looks like “buffer flush” and now i see “13″, after reboot, works.
Tried to give as much details as possible, seems changing buffer amount does “flush” remaining bits to BCR when using midi-ox.