This topic contains 3 replies, has 2 voices, and was last updated by 
dlmorley 10 years, 1 month ago.
-
Posts
-
Hi there
I got a BCR2000 to update and having read what you said I have noticed that the last rotary controllers lights light up slightly and follow the first rotary controller. Is this possibly the issue you meant and should I return my unit before installing your firmware?
Thanks
david-
This topic was modified 10 years, 1 month ago by dlmorley.
poor quality but you can see the ghosting (stronger in real life!)
https://www.youtube.com/watch?v=juKYmsSv2Ig&feature=youtu.be
-
This reply was modified 10 years, 1 month ago by dlmorley.
Hi David,
thanks for posting the video!
This is not the behaviour I tried to describe in the “Hardware Issues” post
https://zaqaudio.com/forums/topic/sticky-hardware-issuesWhat I tried to describe over there was ghost lights in the LCD (the 4-digit, 7-segment display on the top right), not the encoder rings.
To make even more sure though, I recommend you the following procedure:
On the original Behringer firmware:
- try all the encoders for unresponsive or slow behaviour
- enter the edit mode for every button (hold edit + press button)
=> if it enters, it´s already fine and you can just exit again
Then try uploading our free demo first and check out the buttons/encoders there before your purchase.Let me know if you have any more questions in this regard.
Cheers!
Thanks! I’ll check it out.
David. -
This topic was modified 10 years, 1 month ago by
You must be logged in to reply to this topic.